EVO-X2 BIOS Guide to Adjust VRAM Size

A notice: This guide only applies to BIOS versions EVO-X2 1.04 05/12/2025 or newer.

---

1. Access the BIOS interface

• Make sure the EVO-X2 device is turned off but connected to a power source.

• Press the power button and then repeatedly ESC keyto open the BIOS menu.
  (See figure below.)

---

2. Navigate to the "Advanced" menu

• Use the Arrow keys (→) on the keyboard to select the tab Advanced to select.
  (See figure below.)

---

3. Select "GFX Configuration"

• Use the Arrow keys (↓), to GFX Configuration to highlight and press Enter.
  (See figure below.)

---

4. Adjust "iGPU Configuration"

• Choose iGPU Configuration, press Enterand select the Arrow keys (↓) the option UMA_SPECIFIED.
  (See figure below.)

---

5. Set "UMA Frame Buffer Size"

• Mark with the Arrow keys (↓) the option UMA Frame Buffer Size and press Enter.

• In the submenu you can use the Arrow keys (↓) adjust the VRAM size:

  • 64GB-Systeme: Maximal 48GB VRAM.

  • 128GB systems: Maximum 96GB VRAM.
    (See figure below.)

---

6. Confirm VRAM size

• Press Enterto save the selected VRAM size.
  (See figure below.)

---

7. Save changes and exit

• Switch with the Arrow keys (→) to the rider Save & Exit.

• Choose Save & Reset and press Enterto save the changes and exit the BIOS.
  (See figure below.)

---

The VRAM adjustment is now complete.

(The keyboard shortcuts used are listed above.)